Strip Heater


Type | B


Metal braid covers leadwires, exit same end of heater.

View Our Band & Strip Heater Catalogue | Click Here


Strip heaters should be firmly clamped to the surface to be heated to prevent expansion or bowing away from the heated surface. Clamping bars 1/4” thick are recommended spaced 3” to 4” apart. When spacing heaters as close as 3/4”, or in close proximity to bright reflective surfaces, reduce wattage by 10%.

  • Enter two known values and press Solve to calculate unknowns.

    Volts
    (Volts)

    Resistance
    (Ohms)

    Current
    (Amps)

    Power
    (Watts)