PVC Blanket Heaters

$135.00$312.00

Rama is pleased to announce that we have available, direct to the consumer, our own line of PVC Blanket Heaters. For over fifty years, Rama’s name has stood for quality in the industrial heater industry. Now, Rama brings to the electrical, plumbing and landscape contractors a patented design that has been proven in the field for many years. This heater is portable, rugged, and easy to use. Simply wrap the blanket heater around the section of PVC pipe you wish to bend, secure the strap around the heater, and plug into any 120 VAC outlet. When PVC conduit or pipe becomes pliable, remove the heater and bend by hand.

SKU: N/A Category:
Clear
View cart

Description

PVC BLANKET HEATER SPECIFICATIONS AND INFORMATION​

For over fifty years, Rama’s name has stood for quality in the industrial heater industry. Now, Rama brings to the electrical, plumbing, and landscape contractors a patented design that has been proven in the field for fifteen years! This heater is portable, rugged, and easy to use. Simply wrap the blanket heater around the section of PVC pipe you wish to bend, secure the strap around the heater, and plug the unit into any 120 VAC outlet. When the PVC conduit or pipe becomes pliable, remove the heater and bend by hand.

SPECIFICATIONS

Rama’s
Part No:
F-3418
$128.50/ea
F-3419
$230.40/ea
F-3420
$305.95/ea
Capacity:Up to 1-1/2”
PVC
All Schedules
2” - 3”
PVC
All Schedules
3-1/2” - 4” PVC

All Schedules
Power Source:120 Volts
A/C
120 Volts
A/C
120 Volts
A/C
Nom. Size:13” x 8-1/4”

(330.2 mm x 209.6 mm)
30” x 13-1/4”

(762.0 mm x 336.6 mm)
38” x 16-1/4”

(965.2 mm x 412.8 mm)
Nom. Weight:1.7 lbs

(.8 kg)
3.3 lbs

(1.5 kg)
4.9 lbs

(2.2 kg)

EASY AND EFFICIENT

The heater temperature is maintained by an internal, automatic thermostat that allows for the heater to get to temperature quickly but will not allow the heater to go above 145° C (~300°F). Bending a schedule 40 PVC 1/2 inch pipe at a 90° angle can be accomplished in as little as 3 to 4 minutes! Bending a 4-inch diameter, schedule 80 PVC pipe can be done with the largest of the heaters in as little as 12 minutes! The unique circuit design and the way the heater is constructed ensure controlled, even heating for uniform bending time after time. The use of heavy-duty materials; including t-stat, power cord, velcro® strap, and fiberglass re-enforced silicone rubber; allow for long service life in the field.

FACTORY-DIRECT PRICING!

Portable PVC Blanket Heater to Bend Schedule 20 to 80 PVC Pipe​

FEATURES

  • Well-insulated power cord, built-in strain relief, and molded rubber housing for thermostat allow for rugged outdoor use.
  • All metal, automatic thermostat provide uniform and controlled heating for precise bends every time.
  • The Velcro® strap allows the heater to be applied and removed from PVC piping with ease and speed.​
  • Steel rods are molded to the longitudinal sides of the heater to facilitate proper contact with the PVC pipe and heater.​

WHO IS THE PRODUCT MADE FOR:

  • General Contractors​
  • Electricians
  • Plumbers
  • Landscapers

Additional information

Pipe Size

up to 1 1/2", 2 – 3", 3 1/2 – 4"

5.00
1 reviews
1
0
0
0
0
Customer Image Gallery

1 review for PVC Blanket Heaters

  1. F-3420 and F-3418 pvc heat blanket's
    Our company bought the F-3420 and F-3418 pvc heat blanket's. Boy this thing is nice!! We went with this Rama vs the Greenlee to try it out. Number one thing about this awesome blanket is the price, don't be worried that the price is half of the other company's. I would say go ahead and buy two of these for under the price of just one the others. We have had these for a while in the elements and it has held up perfectly. If you are wanting to save your company some money on buying different angles of conduit then this is the pvc heating blanket you should purchase, especially with the rising cost and wait times for pvc fittings, this thing will pay for itself. We really wanted this blanket for our utilities company for doing 4" risers where they bore in 4" hdpe pipe. That pipe is always curled up where it gets pulled into the hole and it has always been a huge struggle to either get it to lay flat to connect our pipe to it. With this blanket and about 12 minutes for hdpe pipe it is nice and pliable to get it to lay flat, so we can connect our conduit or rigid pipe to go up the pole or transfer it to pvc. The only thing I wish could be added to the lager blanket heaters would be multiple Velcro straps versus just the one in the middle, so that it could be strapped the conduit a little easier for a tighter fit. There customer service is top notch as well. Cant wait to use this for years to come.
    1
Write a review