CARTRIDGE HEATER QUOTE FORM

Please fill out our quote form as complete as possible to eliminate confusion and delayed response from our customer support team.

INQUIRY DATE:
QTY:
COMPANY:
CONTACT NAME:
ADDRESS:
CITY:
STATE:
ZIP:
PHONE
EMAIL
SPECIFICATIONS:
VOLTS:
WATTS:
WATT DENSITY:
MAX TEMP (°F)
DIAMETER STANDARD: NOMINAL (ACTUAL)
- 1/4 (.245)
- 3/8 (.370)
- 1/2 (.495)
- 5/8 (.620)
- 3/4 (.745)
DIAMETER STANDARD METRIC: NOMINAL (ACTUAL)
- 6.5 (.255)
- 8 (.315)
- 10 (.394)
- 12.5 (.492)
- 16 (.630)
- 20 (.787)
SHEATH LENGTH:

±2%
SHEATH MATERIAL:
- INCOLOY
- STAINLESS STEEL
TOTAL HEATED LENGTH:

±2% (MIN .25” COLD AREA REQUIRED AT LEAD END)
HEAT:
- STANDARD
- PROFILED
IF PROFILED PROVIDE WATTAGE PER ZONE:
MULTICIRCUIT:
- 3-PHASE
- 2-ZONE
- 3-ZONE
(NOTE: FOR 3/4” ONLY. MINIMUM LENGTH REQUIRED)
STANDARD CONFIGURATIONS AND MODIFICATIONS:
CONFIGURATIONS AND MODIFICATIONS MAY BE VIEWED ON OUR WEBSITE. CHOOSE FROM THE FOLLOWING LISTED:
- TYPE ‘A’
- TYPE ‘B’
- TYPE ‘C’
- TYPE ‘CE
- ’ TYPE ‘D’
- TYPE ‘E’
- ’ TYPE ‘G’
- TYPE ‘H’
- TYPE ‘I’
- TYPE ‘HR’
- TYPE ‘J’
- TYPE ‘K’
- TYPE ‘L’
- TYPE ‘N’
- TYPE ‘Q’
- TYPE ‘S’
- TYPE ‘U’
- TYPE ‘W’
TYPE ‘A’ HEATERS MAY BE MODIFIED FROM STOCK IF AVAILABLE. CHOOSE FROM THE FOLLOWING LIST BELOW:
- MOD ‘E’
- MOD ‘G’
- TYPE ‘E’
- TYPE ‘G’
- TYPE ‘J’
- TYPE ‘K’
- TYPE ‘L’
- TYPE ‘Q’
- TYPE ‘S’
TERMINATION:
LEADWIRE LENGTH:

±2%
LEADWIRE TYPE:LEADWIRE TYPE:
- FIBERGLASS
- TEFLON
- CORD (SPECIAL)
THERMOCOUPLE LENGTH:

±2%
.
- TYPE ‘J’ (STANDARD)
- TYPE ‘K’
- OTHER
ARMOR LENGTH:

±2%
.
- Si/FIBER SLEEVE
- S/S BRAID
- S/S CONDUIT
- CERAMIC BEAD
SPECIAL SEALANT: RAMA CAN PROVIDE SPECIAL EPOXY SEALS, SILICONE VARNISH, OR RTV UPON REQUEST SPECIAL ITEMS: GROUND WIRE, POST TERMINAL, TWIST LOCK PLUGS, THERMOSTATS, COOLING FINS, AND OTHER ACCESSORIES MAY BE AVAILABLE UPON REQUEST. CONSULT FACTORY FOR SPECIFICATIONS. SPECIAL NON-STANDARD DESIGNS MUST BE ACCOMPANIED BY A DIMENSIONAL DRAWING.
SPECIAL SEALANT: RAMA CAN PROVIDE SPECIAL EPOXY SEALS, SILICONE VARNISH, OR RTV UPON REQUEST
SPECIAL ITEMS: GROUND WIRE, POST TERMINAL, TWIST LOCK PLUGS, THERMOSTATS, COOLING FINS, AND OTHER ACCESSORIES MAY BE AVAILABLE UPON REQUEST. CONSULT FACTORY FOR SPECIFICATIONS.
SPECIAL NON-STANDARD DESIGNS MUST BE ACCOMPANIED BY A DIMENSIONAL DRAWING.
NOTE ANY SPECIAL REQUIREMENTS BELOW:
CAPTCHA

INQUIRY DATE:

COMPANY:

CONTACT NAME:

ADDRESS:

CITY:

STATE:

ZIP:

PHONE:

FAX:

EMAIL:

SPECIFICATIONS:

VOLTS:

WATTS:

WATT DENSITY:

MAX TEMP (°F)

DIAMETER STANDARD: NOMINAL (ACTUAL):

1/4 (.245) 3/8 (.370) 1/2 (.495) 5/8 (.620) 3/4 (.745)

DIAMETER STANDARD METRIC: NOMINAL (ACTUAL):

6.5 (.255) 8 (.315) 10 (.394) 12.5 (.492) 16 (.630) 20 (.787)

SHEATH LENGTH:

SHEATH MATERIAL:

INCOLOY STAINLESS STEEL

TOTAL HEATED LENGTH:

HEAT:

STANDARD PROFILED

IF PROFILED PROVIDE WATTAGE PER ZONE:

MULTICIRCUIT:

3-PHASE 2-ZONE 3-ZONE

STANDARD CONFIGURATIONS AND MODIFICATIONS:

(NOTE: FOR 3/4” ONLY. MINIMUM LENGTH REQUIRED)

CONFIGURATIONS AND MODIFICATIONS MAY BE VIEWED ON OUR WEBSITE. CHOOSE FROM THE FOLLOWING LISTED:

TYPE ‘A’ TYPE ‘B’ TYPE ‘C’ TYPE ‘CE TYPE ‘D’ TYPE ‘E’ TYPE ‘F TYPE ‘G’ TYPE ‘H’ TYPE ‘I’ TYPE ‘HR’ TYPE ‘J’ TYPE ‘K’ TYPE ‘L’ TYPE ‘N’ TYPE ‘Q’ TYPE ‘S’ TYPE ‘U’ TYPE ‘W’

TERMINATION:

LEADWIRE LENGTH:

LEADWIRE TYPE:

FIBERGLASS TEFLON CORD (SPECIAL)

THERMOCOUPLE LENGTH:

TYPE ‘J’ (STANDARD) TYPE ‘K’ OTHER

ARMOR LENGTH:

Si/FIBER SLEEVE S/S BRAID S/S CONDUIT CERAMIC BEAD

SPECIAL SEALANT: RAMA CAN PROVIDE SPECIAL EPOXY SEALS, SILICONE VARNISH, OR RTV UPON REQUEST SPECIAL ITEMS: GROUND WIRE, POST TERMINAL, TWIST LOCK PLUGS, THERMOSTATS, COOLING FINS, AND OTHER ACCESSORIES MAY BE AVAILABLE UPON REQUEST. CONSULT FACTORY FOR SPECIFICATIONS. SPECIAL NON-STANDARD DESIGNS MUST BE ACCOMPANIED BY A DIMENSIONAL DRAWING.

NOTE ANY SPECIAL REQUIREMENTS BELOW:

RAMA COrporation

Home

Products

About Us

Contact

Terms & Conditions

951-654-7351

Mon - Fri (6AM - 3PM)

Sat - Sun (Closed)

600 West Esplanade Ave,
San Jacinto CA, 92583

Facebook-f Instagram

Copyright © 2023 Rama Corporation. Designed by Fluent Designs