-
Cartridge Heaters, Non-StockedModification E | NPT Bushing
Stainless steel or brass bushing, welded or brazed to the terminal end of heater sheath at cold junction. Leadwires using fiberglass , Teflon, or silicone rubber insulation may be but…
-
Cartridge Heaters, Non-StockedType S | Flexible Conduit with 90° Elbow
Alloy steel 90° elbow tack-welded to the heater with stainless steel flexible conduit and insulated stranded nickel lead wires. Consult factory for customer-specific elbow dimensions. Standard lead wire orientation shown….
-
Cartridge Heaters, Non-StockedType J | Right Angle Leadwires
2” Solid nickel terminal pins exit 90° from end slot. Heater end is potted and finished with end cap tack welded to sheath. Terminal pins are connected to insulated, stranded…
-
Cartridge Heaters, Non-StockedModification G | Stainless Steel Flange
Flange, stainless steel, 1/16” thick tack welded to heater at leadwire end. Standard flange placement shown. Special immersed lengths to be specified by customer. This heater can be modified from…
-
Cartridge Heaters, Non-StockedType E | Braided Stainless Steel Sleeving
Insulated, stranded nickel leadwires are covered by a stainless steel braid. Shrink tubing covers end of sleeving at leadwire end. 1/4” diameter heaters are supplied with an optional 3/4” long…
-
Cartridge Heaters, Non-StockedType C | Teflon Seal & Leads
Teflon seal at leadwire end with Teflon insulated, stranded silver plated copper leadwires. Not recommended for use where temperature at leadwire end will exceed 300°F. This heater cannot be modified…
-
Cartridge Heaters, Non-StockedType B | All Flexible Leadwires
Stranded nickel leadwires with insulation swaged into heater. This heater is stocked in many sizes and power ratings. Not recommended for use in applications where the temperature at the leadwire…
-
Cartridge Heaters, Non-Stocked
Modification E | NPT Bushing
Stainless steel or brass bushing, welded or brazed to the terminal end of heater sheath at cold junction. Leadwires using fiberglass , Teflon, or silicone rubber insulation may be but…
-
Cartridge Heaters, Non-Stocked
Type S | Flexible Conduit with 90° Elbow
Alloy steel 90° elbow tack-welded to the heater with stainless steel flexible conduit and insulated stranded nickel lead wires. Consult factory for customer-specific elbow dimensions. Standard lead wire orientation shown….
-
Cartridge Heaters, Non-Stocked
Type J | Right Angle Leadwires
2” Solid nickel terminal pins exit 90° from end slot. Heater end is potted and finished with end cap tack welded to sheath. Terminal pins are connected to insulated, stranded…
-
Cartridge Heaters, Non-Stocked
Modification G | Stainless Steel Flange
Flange, stainless steel, 1/16” thick tack welded to heater at leadwire end. Standard flange placement shown. Special immersed lengths to be specified by customer. This heater can be modified from…
-
Cartridge Heaters, Non-Stocked
Type E | Braided Stainless Steel Sleeving
Insulated, stranded nickel leadwires are covered by a stainless steel braid. Shrink tubing covers end of sleeving at leadwire end. 1/4” diameter heaters are supplied with an optional 3/4” long…
- Call Us (951) 654-7351
- Call Us (951) 654-7351
Celebrating 77 years in business